联系我们   Contact
你的位置:首页 > 常用型号 > GTD-1000Tx

产品名称:GTD-1000Tx气体检测仪

上图:标准型GTD-1000Tx

上图:插入式加长杆型GTD-1000Tx

GTD-1000Tx概述

◤  采用阻燃结构,对爆炸危险区内的有毒气体和氧气进行持续检测
◤  采用适于有毒气体和氧气的检测原理,打造出色的选择性
◤  检测低于TLV(阈限值)的有毒气体,表现优异性能
◤  高品质和低成本
◤  4-20mA 直流输出信号
◤  结构简约和设计紧凑
◤  轻松校准与维护内部FND显示屏
◤  单人校准与维护

GTD-1000Tx技术参数

型号 GTD-1000Tx
测量气体 氧气/有毒气体(一氧化碳、氯气、氨气等)
测量方式 扩散型
测量方法 电化学、半导体
响应时间 T90 < 45秒
精度 ±3% / 满量程
输出信号 4 ~ 20mA 直流
电缆/距离 电力电缆 + 信号电缆:3-线 > 1.5平方(AWG16)/最大:2500m
电力电缆 + 信号电缆:双线 > 1.5平方(AWG16)/最大:2500m
安装类型 2英寸杆式安装、壁挂式安装、管式安装
工作温度 -20℃ ~ +60℃
运行湿度 5 ~ 99%.RH(非冷凝)
运行功率 18 ~ 31V 直流(常规:24V 直流)/ 最大:150mA
尺寸 136 x 176 x 95(宽x高x深)mm
重量 1.4kg
认证 防爆型(Ex d IIC T6、IP66/67)、CE

▷ Continuous detection of toxic gases and oxygen in explosion hazardous area with flame proof structure
▷ Excellent selectivity by adapting detection principle only for toxic gases & oxygen
▷ Superior performance for detecting toxic gases below TLV
▷ High quality and low cost of ownership
▷ 4-20mA DC output signal
▷ Simple structure and compact design
▷ Easy calibration & maintenance with inside FND display
▷ Calibration and maintenance by one-man
  TRANSMITTER TYPE OXYGEN & TOXIC GAS DETECTOR
Model GTD-1000Tx
Measuring gas O2 / Toxic gases (CO, CL2,  NH3 & etc)
Measuring type Diffusion type
Measuring method Electrochemical cell, Semiconductor cell
Measuring range Refer to Toxic Gas Measuring Range(166 page)
Response time < 45 sec / 90% scale
Accuracy ±3% / Full scale
Output signal 4-20mA DC
Cable/Distance Power + Signal cable : 3-wire 〉1.5sq (AWG16) / 2500m max
Power + Signal cable : 2-wire >1.5sq (AWG16) / 2500m max
Conduit connection G. Rc. NPT 1/2" & 3/4" (G 3/4" : standard)
Mounting type 2" Pole mount, Wall mount, Duct mount
Operating temperature -20℃ ~ +60℃
Operating humidity 5 ~ 99%.RH (non-condensing)
Operating power 18 ~ 31V DC (24V DC normal) / 150mA max
Dimensions 136 x 176 x 95 (W x H x D)mm
Weight 1.4kg
Approval Explosion proof type (Ex d IIC T6, IP66/67) KCs